修复你的物品 社区 商店

Prerequisite

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

简介

This is a prerequisite only.

你所需要的

  1. Prerequisite, Internal Hardware: 步骤 1 中的图像 1，3 Prerequisite, Internal Hardware: 步骤 1 中的图像 2，3 Prerequisite, Internal Hardware: 步骤 1 中的图像 3，3

    • Use a Torx T3 screwdriver to unscrew the four 3.5 mm Torx T3 screws holding the back plate.

    • Make sure the screws are kept in a safe place to insure they are not lost.

    • Remove the back plate.

    编辑

  3. Prerequisite: 步骤 2 中的图像 1，2 Prerequisite: 步骤 2 中的图像 2，2

    • The plastic frame is clipped inside the steel body with four clips, two each on the left and the right side of the watch, near the corners. You can stick a small screwdriver into the cutouts right above the clips and gently lever the plastic frame up, corner by corner.

    • Once the clips are released, use a pair of tweezers to grab onto the black plastic frame and remove the internal hardware.

    • Adhesive on the back side of the battery holds the internal components to the front case.

    • Use tweezers or a plastic opening tool to disconnect the ribbon cable from the motherboard.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Orlandria Heggs

于10/01/15注册

527 声望

创作了3篇指南

徽章: 12

+ 9更多徽章

团队

USF Tampa, Team 1-7, Leahy Fall 2015 USF Tampa, Team 1-7, Leahy Fall 2015 的会员

USFT-LEAHY-F15S1G7

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 77