跳转到主内容

简介

This guide will show you how to remove the PowerLead Puto PLD003 side panel. The removal of the side panel is necessary, in order to, replace most parts.

配件

没有特定配件。

  1. Slide the battery eject button open to release the battery door.
    • Slide the battery eject button open to release the battery door.

  2. With the battery door open, carefully remove all four 5 mm Phillips #1 screws.
    • With the battery door open, carefully remove all four 5 mm Phillips #1 screws.

  3. Rotate the camera so that the underside is facing up.
    • Rotate the camera so that the underside is facing up.

    • Remove the four 5 mm Phillips #1 screws.

  4. Place the camera on a flat surface, with its underside facing you.
    • Place the camera on a flat surface, with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Justin Tew

于2016年03月31日注册

767 信誉积分

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 87