跳转到主内容

PowerLead Puto PLD003 Lens Replacement

你所需要的

  1. PowerLead Puto PLD003 Lens Replacement, Side Panel: 步骤 1 中的图像 1,1
    • Slide the battery eject button open to release the battery door.

  2. PowerLead Puto PLD003 Lens Replacement: 步骤 2 中的图像 1,1
    • With the battery door open, carefully remove all four 5 mm Phillips #1 screws.

  3. PowerLead Puto PLD003 Lens Replacement: 步骤 3 中的图像 1,1
    • Rotate the camera so that the underside is facing up.

    • Remove the four 5 mm Phillips #1 screws.

  4. PowerLead Puto PLD003 Lens Replacement: 步骤 4 中的图像 1,1
    • Place the camera on a flat surface, with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

  5. PowerLead Puto PLD003 Lens Replacement, Lens: 步骤 5 中的图像 1,2 PowerLead Puto PLD003 Lens Replacement, Lens: 步骤 5 中的图像 2,2
    • Remove the three 4 mm Phillips #1 screws holding the weight.

    • Remove the weight.

  6. PowerLead Puto PLD003 Lens Replacement: 步骤 6 中的图像 1,1
    • Remove the two 4 mm Phillips #1 screws holding the back panel in place.

  7. PowerLead Puto PLD003 Lens Replacement: 步骤 7 中的图像 1,1
    • Apply pressure to the back panel (away from the camera) to remove.

  8. PowerLead Puto PLD003 Lens Replacement: 步骤 8 中的图像 1,1
    • Set aside back panel for now.

    • Remove the final 4 mm Phillips #1 screw holding the screen in place. It is very small and hard to see.

  9. PowerLead Puto PLD003 Lens Replacement: 步骤 9 中的图像 1,1
    • Carefully apply pressure, away from the camera, to the screen to detach it from the body.

    • The white cord should still be connected to the body.

    • OPTIONAL: Remove the screen to make accessing the lens easier

  10. PowerLead Puto PLD003 Lens Replacement: 步骤 10 中的图像 1,1
    • Unscrew the two 4 mm Phillips #1 screws holding onto the lens casing

    • There are also two 4 mm Phillips #1 screws on the other side holding onto the lens casing, remove them as well.

  11. PowerLead Puto PLD003 Lens Replacement: 步骤 11 中的图像 1,1
    • Pull forward on the lens casing to remove it. The cord connecting the light to the motherboard should still be attached.

  12. PowerLead Puto PLD003 Lens Replacement: 步骤 12 中的图像 1,1
    • Unscrew the three 4 mm Phillips #1 screws holding the plastic lens holder.

  13. PowerLead Puto PLD003 Lens Replacement: 步骤 13 中的图像 1,1
    • Remove the plastic lens holder.

  14. PowerLead Puto PLD003 Lens Replacement: 步骤 14 中的图像 1,1
    • Push the lens out of the plastic casing from the back.

    • Insert new lens into the plastic casing.

结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 3

总计 163