修复你的物品 社区 商店

PowerLead Puto PLD003 Back Buttons Replacement

简介

This guide shows how to remove the screws that hold the camera together, how to remove the side panel from the camera, how to remove the back panel, and how to replace the back buttons.

你所需要的

  1. PowerLead Puto PLD003 Back Buttons Replacement, Side Panel: 步骤 1 中的图像 1，1

    • Slide the battery eject button open to release the battery door.

    编辑

  2. PowerLead Puto PLD003 Back Buttons Replacement: 步骤 2 中的图像 1，1

    • With the battery door open, carefully remove all four 5 mm Phillips #1 screws.

    编辑

  3. PowerLead Puto PLD003 Back Buttons Replacement: 步骤 3 中的图像 1，1

    • Rotate the camera so that the underside is facing up.

    • Remove the four 5 mm Phillips #1 screws.

    编辑

  5. PowerLead Puto PLD003 Back Buttons Replacement: 步骤 4 中的图像 1，1

    • Place the camera on a flat surface, with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

    编辑

  6. PowerLead Puto PLD003 Back Buttons Replacement, Back Buttons: 步骤 5 中的图像 1，2 PowerLead Puto PLD003 Back Buttons Replacement, Back Buttons: 步骤 5 中的图像 2，2

    • Remove the three 4 mm Phillips #1 screws holding the weight.

    • Remove the weight.

    编辑

  7. PowerLead Puto PLD003 Back Buttons Replacement: 步骤 6 中的图像 1，1

    • Remove the two 4 mm Phillips #1 screws holding the back panel in place.

    编辑

  8. PowerLead Puto PLD003 Back Buttons Replacement: 步骤 7 中的图像 1，1

    • Apply pressure to the back panel, away from the camera to remove.

    编辑

  9. PowerLead Puto PLD003 Back Buttons Replacement: 步骤 8 中的图像 1，2 PowerLead Puto PLD003 Back Buttons Replacement: 步骤 8 中的图像 2，2

    • Place the back panel so the buttons are facing down and the circuit board is facing up.

    • Remove the three 4 mm Phillips #1 screws holding the circuit board in place.

    编辑

  10. PowerLead Puto PLD003 Back Buttons Replacement: 步骤 9 中的图像 1，1

    • Set aside the circuit board.

    • These nubs are what is currently holding the buttons in place.

    • Carefully apply pressure and remove the set of buttons from the nubs.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 146