跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

PowerBook G4 Titanium Mercury RAM Replacement

你所需要的

  1. PowerBook G4 Titanium Mercury RAM Replacement, Keyboard: 步骤 1 中的图像 1,1
    • Remove the battery.

    • Turn the keyboard locking screw so that it is parallel to the space bar.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  2. PowerBook G4 Titanium Mercury RAM Replacement: 步骤 2 中的图像 1,1
    • Rest the keyboard face down on the trackpad area.

    • Disconnect the keyboard connector from the logic board.

  3. PowerBook G4 Titanium Mercury RAM Replacement: 步骤 3 中的图像 1,1
    • Your laptop should look approximately like this.

  4. PowerBook G4 Titanium Mercury RAM Replacement, RAM: 步骤 4 中的图像 1,1
    • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

    • Pull the RAM chip out.

    • Repeat this process if a second RAM chip is installed.

结论

To reassemble your device, follow these instructions in reverse order.

13等其他人完成本指南。

附加文件

iRobot

于09/24/09注册

1 声望

创作了636篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 7

总计 9,308