修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

PowerBook G4 Titanium DVI RAM Replacement

简介

Two RAM slots allow up to 1 GB of PC133 RAM.

你所需要的

  1. PowerBook G4 Titanium DVI RAM Replacement, Battery: 步骤 1 中的图像 1，2 PowerBook G4 Titanium DVI RAM Replacement, Battery: 步骤 1 中的图像 2，2

    • Locate the battery release tab on the underside of the G4.

    • Slide the battery release tab to the left and lift the battery out of the computer.

    翻译

  2. PowerBook G4 Titanium DVI RAM Replacement, Keyboard: 步骤 2 中的图像 1，1

    • Turn the keyboard locking screw located in the middle of the keyboard so that it is parallel to the space bar. A half turn from parallel to parallel will unlock it. Another half turn will lock it again.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    翻译

  4. PowerBook G4 Titanium DVI RAM Replacement: 步骤 3 中的图像 1，1

    • Rest the keyboard face down on the trackpad area.

    • Disconnect the keyboard connector from the logic board.

    翻译

  5. PowerBook G4 Titanium DVI RAM Replacement: 步骤 4 中的图像 1，1

    • Your laptop should look approximately like this.

    翻译

  6. PowerBook G4 Titanium DVI RAM Replacement, RAM: 步骤 5 中的图像 1，1

    • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

    • Pull the RAM chip out.

    • Repeat this process if a second RAM chip is installed.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

24等其他人完成本指南。

附加文件

作者

与3其他贡献者

iRobot

于09/24/09注册

1 声望

创作了636篇指南

徽章: 36

+ 33更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 15

总计 14,661