跳转到主内容

简介

Replacing this keyboard is easy and takes only a few minutes.

工具

没有特定工具。

  1. Locate the battery release tab on the underside of the G4. Slide the battery release tab to the left and lift the battery out of the computer.
    • Locate the battery release tab on the underside of the G4.

    • Slide the battery release tab to the left and lift the battery out of the computer.

  2. Turn the keyboard locking screw located in the middle of the keyboard so that it is parallel to the space bar. A half turn from parallel to parallel will unlock it. Another half turn will lock it again.
    • Turn the keyboard locking screw located in the middle of the keyboard so that it is parallel to the space bar. A half turn from parallel to parallel will unlock it. Another half turn will lock it again.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  3. Rest the keyboard face down on the trackpad area.
    • Rest the keyboard face down on the trackpad area.

    • Disconnect the keyboard connector from the logic board.

  4. Your laptop should look approximately like this.
    • Your laptop should look approximately like this.

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

附加文件

iRobot

于2009年09月24日注册

1 信誉积分

创作了624篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 3

过去的30天: 21

总计 9,988