简介

Install an Airport Extreme 802.11g card internally.

配件

  1. Use a coin to turn the battery locking screw 90 degrees clockwise.
    • Use a coin to turn the battery locking screw 90 degrees clockwise.

    • Lift the battery out of the computer.

    添加评论

  2. Flip down the door on the right side of the battery compartment.
    • Flip down the door on the right side of the battery compartment.

    添加评论

    • Use a spudger or flathead screwdriver to disconnect the Airport antenna from the card.

    添加评论

    • Grasp the plastic tab and pull the card out all the way.

    I accidentally, cut the wire that plug with the small adapter, can you help me to see how I can fix it.

    belkin - 回复

结论

To reassemble your device, follow these instructions in reverse order.

14等其他人完成本指南。

附加文件

iRobot

于2009年09月24日注册

1 信誉积分

创作了621篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 15

总计 16,594