简介

Install an Airport Extreme 802.11g card internally.

  1. Use a coin to turn the battery locking screw 90 degrees to the right.
    • Use a coin to turn the battery locking screw 90 degrees to the right.

    • Lift the battery out of the computer.

  2. Flip down the door on the right side of the battery compartment.
    • Flip down the door on the right side of the battery compartment.

  3. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Use a spudger to disconnect the Airport antenna from the card.
    • Use a spudger to disconnect the Airport antenna from the card.

  5. Grasp the plastic tab and pull the card out all the way.
    • Grasp the plastic tab and pull the card out all the way.

结论

To reassemble your device, follow these instructions in reverse order.

11等其他人完成本指南。

附加文件

iRobot

于2009年09月24日注册

1 信誉积分

创作了623篇指南

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 4

总计 10,477