跳转到主内容

简介

One RAM slots allow up to 1.25 GB of PC2700 RAM.

  1. Use a coin to turn the battery locking screw 90 degrees to the right.
    • Use a coin to turn the battery locking screw 90 degrees to the right.

    • Lift the battery out of the computer.

  2. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  3. Remove the four Phillips screws from the memory door.
    • Remove the four Phillips screws from the memory door.

    • Slide the memory door away from the memory compartment.

  4. Release the tabs on each side of the RAM chip at the same time.  These tabs lock the chip in place and releasing them will cause the chip to "pop" up.
    • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

    • Pull the chip directly out from its connectors.

结论

To reassemble your device, follow these instructions in reverse order.

37等其他人完成本指南。

附加文件

iRobot

于2009年09月24日注册

1 信誉积分

创作了624篇指南

Why does my computer only show 768mb RAM after the upgrade? 1 RAM slot is the soldered 256mb and the other is 1gb.... Hm...

iamkiyoshi - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 6

过去的30天: 18

总计 19,134