跳转到主内容

PowerBook G3 Lombard Modem Replacement

你所需要的

  1. PowerBook G3 Lombard Modem Replacement, Keyboard: 步骤 1 中的图像 1,1
    • Turn the computer so that the ports are facing you.

    • If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.

  2. PowerBook G3 Lombard Modem Replacement: 步骤 2 中的图像 1,1
    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    • Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.

  3. PowerBook G3 Lombard Modem Replacement: 步骤 3 中的图像 1,1
    • Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.

    • In order to replace the keyboard, you must first remove the modem.

  4. PowerBook G3 Lombard Modem Replacement, Heat Shield: 步骤 4 中的图像 1,1
    • Remove the three silver Phillips screws that attach the heat shield to the internal metal framework.

  5. PowerBook G3 Lombard Modem Replacement: 步骤 5 中的图像 1,1
    • Lift the heat shield up and pull it toward you.

  6. PowerBook G3 Lombard Modem Replacement: 步骤 6 中的图像 1,1
    • Your laptop should look approximately like this.

  7. PowerBook G3 Lombard Modem Replacement, PRAM Battery: 步骤 7 中的图像 1,1
    • Pull the battery cable directly up from the logic board.

  8. PowerBook G3 Lombard Modem Replacement: 步骤 8 中的图像 1,1
    • Remove the battery from its holder by pulling up and to the left.

  9. PowerBook G3 Lombard Modem Replacement, Modem: 步骤 9 中的图像 1,1
    • Remove the two silver Phillips screws from the modem.

  10. PowerBook G3 Lombard Modem Replacement: 步骤 10 中的图像 1,1
    • Use a spudger, the tips of your fingers, or a flat non-metal tool to get under the modem's edge and pry it up from its socket as shown in the picture.

  11. PowerBook G3 Lombard Modem Replacement: 步骤 11 中的图像 1,1
    • Disconnect the cable from the right side of the modem.

  12. PowerBook G3 Lombard Modem Replacement: 步骤 12 中的图像 1,1
    • Your laptop should look approximately like this.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

附加文件

iRobot

于09/24/09注册

1 声望

创作了636篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 2,806