简介

In order to access the display or replace any portion of the sound system you must first remove the speaker panel from the computer.

配件

无需配件。

Close the screen and turn the PowerBook over. Orient the computer so the text of the label is right side up.
  • Close the screen and turn the PowerBook over. Orient the computer so the text of the label is right side up.

添加评论

Press and hold the button on the left of the front side and slide the battery out. Press and hold the button on the left of the front side and slide the battery out.
  • Press and hold the button on the left of the front side and slide the battery out.

添加评论

With a T8 torx screwdriver, remove the three 24mm torx screws along the middle of the back panel.
  • With a T8 torx screwdriver, remove the three 24mm torx screws along the middle of the back panel.

添加评论

Turn the computer over and open the display. You should see that the keyboard is loose. Before attempting to remove the keyboard, note that a ribbon cable connects  the keyboard to the logic board. Improper removal may damage your keyboard. Carefully lift the front of the keyboard up slightly and then slide the keyboard towards yourself.
  • Turn the computer over and open the display. You should see that the keyboard is loose.

  • Before attempting to remove the keyboard, note that a ribbon cable connects the keyboard to the logic board. Improper removal may damage your keyboard.

  • Carefully lift the front of the keyboard up slightly and then slide the keyboard towards yourself.

  • Then carefully lift the top half of the keyboard and rotate it towards yourself.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Loosen the ribbon cables connecting the keyboard to the computer by using a plastic opening tool to lift the tabs on either side of the cable port. Gently remove the ribbons from its tabs
  • Loosen the ribbon cables connecting the keyboard to the computer by using a plastic opening tool to lift the tabs on either side of the cable port.

  • Gently remove the ribbons from its tabs

添加评论

Gently wiggle the RAM card to loosen the connection until it pulls free. Gently wiggle the RAM card to loosen the connection until it pulls free.
  • Gently wiggle the RAM card to loosen the connection until it pulls free.

添加评论

Disconnect the wires from the port. Disconnect the wires from the port.
  • Disconnect the wires from the port.

添加评论

Remove the 7mm screw connecting the speaker panel to the computer.
  • Remove the 7mm screw connecting the speaker panel to the computer.

添加评论

To detach the speaker panel's ribbon cable, use a plastic opening tool to lift the tabs on both sides of the cable port. Once loose, pull the ribbon cable free.
  • To detach the speaker panel's ribbon cable, use a plastic opening tool to lift the tabs on both sides of the cable port.

  • Once loose, pull the ribbon cable free.

添加评论

Lift the lighting/audio panel from it's bottom corners and pull the panel towards yourself. Lift the lighting/audio panel from it's bottom corners and pull the panel towards yourself.
  • Lift the lighting/audio panel from it's bottom corners and pull the panel towards yourself.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Michael Mondragon

于2011年04月12日注册

115 信誉积分

创作了9篇指南

团队

Cal Poly, Team 24-59, Amido Spring 2011 Cal Poly, Team 24-59, Amido Spring 2011 的会员

CPSU-AMIDO-S11S24G59

4 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 1,316