跳转到主内容

PowerBeats2 Wireless Headphones by Dr. Dre Battery Replacement

你所需要的

  1. PowerBeats2 Wireless Headphones by Dr. Dre Battery Replacement, Locate Battery.: 步骤 1 中的图像 1,1
    • The battery is located inside the right side ear piece.

  2. PowerBeats2 Wireless Headphones by Dr. Dre Battery Replacement, Heat Right Side.: 步骤 2 中的图像 1,1
    • Heat the right side gently at 140 F for about 3 minutes.

    • Do not over heat or it will melt the housing.

  3. PowerBeats2 Wireless Headphones by Dr. Dre Battery Replacement, Remove Battery Cover/Casing: 步骤 3 中的图像 1,2 PowerBeats2 Wireless Headphones by Dr. Dre Battery Replacement, Remove Battery Cover/Casing: 步骤 3 中的图像 2,2
    • After heating, gently remove the cover/casing as shown in the picture.

    • Take your time and re-heat if cover/casing does not remove smoothly.

  4. PowerBeats2 Wireless Headphones by Dr. Dre Battery Replacement, Desolder & Replace Battery: 步骤 4 中的图像 1,1
    • Desolder battery using soldering iron and replace with replacement battery.

  5. PowerBeats2 Wireless Headphones by Dr. Dre Battery Replacement, Reattach Battery Cover/Casing: 步骤 5 中的图像 1,2 PowerBeats2 Wireless Headphones by Dr. Dre Battery Replacement, Reattach Battery Cover/Casing: 步骤 5 中的图像 2,2
    • After battery is replaced, apply super glue to the border of the inside of the battery cover/casing and put it back in place.

    • Use small clamps/binder clip to hold the housing in place while the super glue dries up.

结论

To reassemble your device, follow these instructions in reverse order.

9等其他人完成本指南。

Faizan Naveed

于04/12/17注册

3,294 声望

创作了8篇指南

团队

Mobile Device Repair Factory Mobile Device Repair Factory 的会员

Business

1 名成员

创作了16篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 5

过去 30 天: 47

总计 26,800