PowerA Enhanced Wired Controller Disassembly

简介

The PowerA enchanced wired controller is a budget friendly Switch and PC compatible controller with no rumble support but on the bright side comes in lots of designs

你所需要的

步骤 1 Start by flipping over the controller the controller to find 8 #0 phillips screws

PowerA Enhanced Wired Controller Disassembly, Start by flipping over the controller the controller to find 8 #0 phillips screws: 步骤 1 中的图像 1，2

PowerA Enhanced Wired Controller Disassembly, Start by flipping over the controller the controller to find 8 #0 phillips screws: 步骤 1 中的图像 2，2

Insert wisdom here.

编辑

步骤 2 The rear programmable buttons appear to be moulded into the shell so are not replaceable

PowerA Enhanced Wired Controller Disassembly, The rear programmable buttons appear to be moulded into the shell so are not replaceable: 步骤 2 中的图像 1，2

front shell is pretty standard fair with removable buttons

编辑

步骤 3 The front shell has mouldings for rumble motors but the motherboard does not have any apparent connections for them

PowerA Enhanced Wired Controller Disassembly, The front shell has mouldings for rumble motors but the motherboard does not have any apparent connections for them: 步骤 3 中的图像 1，2

two screws hold the shell in place, but first we will remove the should button connections

编辑

步骤 4 removing the shoulder button assembly we find two more phillips screws holding the button assembly together

PowerA Enhanced Wired Controller Disassembly, removing the shoulder button assembly we find two more phillips screws holding the button assembly together: 步骤 4 中的图像 1，2

nothing holds the L and R bumpers but the ZL and ZR triggers are on a hinge

编辑

步骤 5 Remove the ZL and ZR triggers

PowerA Enhanced Wired Controller Disassembly, Remove the ZL and ZR triggers: 步骤 5 中的图像 1，2

PowerA Enhanced Wired Controller Disassembly, Remove the ZL and ZR triggers: 步骤 5 中的图像 2，2

small plastic posts hold the triggers in place, gently pry the triggers off the posts using a flathead. These are easy to break so be gentle here. The elastomer underneath is held on by these little posts that stick through the plastic. Removing them is easy but pushing them back in is a challenge

编辑