简介

My RAM configuration may differ from yours, but the process is exactly the same.

工具

无需工具。

  1. Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals of the Power Mac.

      • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

    添加评论

  2. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Push the white tabs next to where your RAM is located away form the RAM chip itself.
    • Push the white tabs next to where your RAM is located away form the RAM chip itself.

      • The RAM chips should move up a tad and become somewhat loose.

    • Your RAM configuration may vary. This process is done the exact same way no matter what your RAM placement looks like.

    添加评论

    • Pull the RAM chips out of the RAM slots.

    • That's all folks! That wasn't too hard, was it?

    • Second image: RAM remains

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Aaron Cooke

于2018年08月28日注册

14,662 信誉积分

创作了22篇指南

团队

NIWOTech NIWOTech 的会员

Community

0 名成员

创作了0篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 5

过去的30天: 27

总计 60