简介

I wasn’t able to find a replacement modem assembly online so you are on your own for that part.

配件

无需配件。

  1. Remove the Phillips #1 screw circled in the picture. Set it aside for re-assembly.
    • Remove the Phillips #1 screw circled in the picture. Set it aside for re-assembly.

    添加评论

  2. Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the single Phillips #1 screw circled in the picture.

    • I apologize for the lack of picture quality. The only camera and lighting I had were my iPhone X´s camera and a table lamp. Lol!

    添加评论

    • Disconnect the modem’s flex cable from the connector on the logic board.

    添加评论

    • Lift the modem assembly out of it´s place on the logic board.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Aaron Cooke

于2018年08月28日注册

14,770 信誉积分

创作了22篇指南

团队

NIWOTech NIWOTech 的会员

Community

0 名成员

创作了0篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 15

总计 27