跳转到主内容

Power Macintosh G3 Blue and White Graphics Card Replacement

你所需要的

  1. Power Macintosh G3 Blue and White Graphics Card Replacement, Graphics Card: 步骤 1 中的图像 1,1
    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  2. Power Macintosh G3 Blue and White Graphics Card Replacement: 步骤 2 中的图像 1,2 Power Macintosh G3 Blue and White Graphics Card Replacement: 步骤 2 中的图像 2,2
    • Remove the single Phillips #1 screw circled in the picture. Set it aside for later.

    • The graphics card is outlined in red in the second image, if you are confused on where this is.

  3. Power Macintosh G3 Blue and White Graphics Card Replacement: 步骤 3 中的图像 1,1
    • Lift the graphics card straight out of it's PCI slot.

    • Be careful not to lift sideways, you can damage the PCI slot! Try your best to lift the graphics card straight up.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

[deleted]

于08/28/18注册

26,112 声望

创作了21篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 4

过去 30 天: 26

总计 1,486