跳转到主内容
  1. Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  2. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  3. Remove the single Phillips #1 screw circled in the picture. Set it aside for later. The graphics card is outlined in red in the second image, if you are confused on where this is.
    • Remove the single Phillips #1 screw circled in the picture. Set it aside for later.

    • The graphics card is outlined in red in the second image, if you are confused on where this is.

  4. Lift the graphics card straight out of it's PCI slot.
    • Lift the graphics card straight out of it's PCI slot.

    • Be careful not to lift sideways, you can damage the PCI slot! Try your best to lift the graphics card straight up.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Aaron Cooke

于2018年08月28日注册

16,917 信誉积分

创作了22篇指南

团队

NIWOTech NIWOTech 的会员

Community

0 名成员

创作了0篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 21

总计 158