步骤 1 Side Access Panel
• Press the green release button on top of the side access panel.
• Pull off the side access panel to get inside the computer.
• When putting the side access panel back on, make sure that the bottom of the panel lines up with the rail on the bottom, and that the chassis is locked with the green latches.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 2 Hard Drive Assembly
• Unscrew the two Phillips screws holding the hard drive in place.
• The hard drive and its carrier should come off together.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 3
• Unplug the IDE and Molex cables from the hard drive.
• Be sure to be careful when removing the IDE cable so as to not damage the pins on the hard drive. (Instead of yanking it, pry it off from side to side.)
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论

嵌入本指南

选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。

<iframe id="dozuki-embed-143175" src="https://zh.ifixit.com/Guide/embed/143175/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-143175"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://zh.ifixit.com/Guide/embed/143175" width="800" height="584" allowfullscreen frameborder="0"></iframe>

预览