简介

Repairing the optical drive in the Power Mac G4 Quicksilver.

配件

无需配件。

  1. The handle to open your computer is located on top of the right side panel.
    • The handle to open your computer is located on top of the right side panel.

    添加评论

  2. Grab the circular handle and pull outward.
    • Grab the circular handle and pull outward.

    添加评论

    • Your computer is now open and ready for repair.

    添加评论

    • The optical drive is in the top left corner of the case.

    添加评论

    • There are four screws to be removed.

    • The first screw can be seen in the first picture.

    • The remaining three screws can be seen in the second picture.

    添加评论

    • Remove the optical drive by pulling the drive away from the front of the computer and out.

    添加评论

    • Detach the two cables attached to the back of the drive.

    • The flat ribbon cable can be detached by pulling the silver tab. The multicolored cable can be removed by grasping the plastic connector on either side and pulling with substantial force.

    添加评论

    • Remove the four screws holding the enclosure to the drive.

    添加评论

    • Push on the back of the drive (side with the connectors) to slide the drive out of the enclosure.

    • Your optical drive is now ready to be replaced.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

Ryan Bylard

于2010年01月20日注册

1,251 信誉积分

创作了5篇指南

团队

Cal Poly, Team 14-41, Regan Winter 2010 Cal Poly, Team 14-41, Regan Winter 2010 的会员

CPSU-REGAN-W10S14G41

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 7

过去的30天: 19

总计 10,017