简介

This guide will illustrate how to remove the heat sink from your PowerMac.

配件

无需配件。

Pull on outer latch. Lower door until it is level with your work surface.
  • Pull on outer latch.

  • Lower door until it is level with your work surface.

  • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

添加评论

Use the spudger to pry the clips horizontally off of the heat sink. Fully remove the clips by lifting upwards.
  • Use the spudger to pry the clips horizontally off of the heat sink.

  • Fully remove the clips by lifting upwards.

添加评论

Remove the heat sink by pulling upwards, off of the logic board.
  • Remove the heat sink by pulling upwards, off of the logic board.

添加评论

终点

6等其他人完成本指南。

Justin Petrilli

于2010年01月21日注册

2,598 信誉积分

创作了11篇指南

团队

Cal Poly, Team 13-24, Maness Winter 2010 Cal Poly, Team 13-24, Maness Winter 2010 的会员

CPSU-MANESS-W10S13G24

4 名成员

创作了13篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 10

总计 5,092