修复你的物品 社区 商店

Power Button Replacement

简介

This guide is applicable to BRIGHT's SunBell 2.0 Y.
If you have a different lamp please find its dedicated guide.

你所需要的

  1. Power Button Replacement, Open electronics case: 步骤 1 中的图像 1，2 Power Button Replacement, Open electronics case: 步骤 1 中的图像 2，2

    • Gently pull apart the two sides of the plastic case. This will reveal the circuit board an battery.

    • Using a Torx 6 Screw driver, loosen and store the 3 screws at the bottom side of the case.

    编辑

  2. Power Button Replacement, Disconnect Battery: 步骤 2 中的图像 1，2 Power Button Replacement, Disconnect Battery: 步骤 2 中的图像 2，2

    • Look for the white plastic battery connector at the base of the circuit board.

    • Carefully grip and pull out the white battery connector. If there is silicone or glue be mindful not to apply much force to prevent the entire connector to come loose from circuity board.

    • Keep battery aside.

    编辑

  4. Power Button Replacement, Circuit board removal: 步骤 3 中的图像 1，2 Power Button Replacement, Circuit board removal: 步骤 3 中的图像 2，2

    • Using a Torx 6 scredriver, remove the (2) screws holding the circuit board

    • With the help of a flat tool, pry the circuit board off the plastic case.

    编辑

  5. Power Button Replacement: 步骤 4 中的图像 1，3 Power Button Replacement: 步骤 4 中的图像 2，3 Power Button Replacement: 步骤 4 中的图像 3，3

    • With aid of a pointy tool, push the damaged flexible button from the top down.

    • Using the fingers, insert the new flexible button from the top-down into the case opening. Make sure the button flange is not folded.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

BRIGHT Products

于11/06/23注册

144 声望

撰写一个指南

徽章: 2

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 5

总计 53