修复你的物品 社区 商店

Porter-Cable PC60TAG Motor Assembly Replacement

简介

After a period of time, it is possible that the motor in the Porter-Cable PC60TAG may experience issues, requiring replacement. This guide will demonstrate how this is done.

你所需要的

  1. Porter-Cable PC60TAG Motor Assembly Replacement, Motor Assembly: 步骤 1 中的图像 1，1

    • Using the Phillips #2 screwdriver, remove the 3/4" Phillips screw on the back cover.

    翻译

  2. Porter-Cable PC60TAG Motor Assembly Replacement: 步骤 2 中的图像 1，1

    • Holding the front of the device, carefully slide the back cover over the cord.

    翻译

  3. Porter-Cable PC60TAG Motor Assembly Replacement: 步骤 3 中的图像 1，1

    • Using the Phillips #2 screwdriver, remove the1/2" Phillips screw holding on the motor brush arm. Repeat on the other side.

    翻译

  4. Porter-Cable PC60TAG Motor Assembly Replacement: 步骤 4 中的图像 1，1

    • Carefully pull the motor brush arm away from the other device, you can leave the wire connected to device. Repeat on the other side.

    翻译

  6. Porter-Cable PC60TAG Motor Assembly Replacement: 步骤 5 中的图像 1，1

    • Using the Phillips #2 screwdriver, remove the 1 inch black retainer screw.

    翻译

  7. Porter-Cable PC60TAG Motor Assembly Replacement: 步骤 6 中的图像 1，1

    • Using the Phillips #2screwdriver, remove the 4, 1/2" Phillips screws around the head gear.

    翻译

  8. Porter-Cable PC60TAG Motor Assembly Replacement: 步骤 7 中的图像 1，1

    • Carefully pull the head gear away from the device, and set aside.

    翻译

  9. Porter-Cable PC60TAG Motor Assembly Replacement: 步骤 8 中的图像 1，1

    • Using the Phillips #2 screwdriver, remove the two, 1/2" screws holding the head to the body on the bottom side of the grinder.

    翻译

  10. Porter-Cable PC60TAG Motor Assembly Replacement: 步骤 9 中的图像 1，1

    • Using the Phillips #2 screwdriver, remove the other two 1/2" screws holding the head to the body on the top side of the grinder.

    翻译

  11. Porter-Cable PC60TAG Motor Assembly Replacement: 步骤 10 中的图像 1，1

    • Holding the head of the device, carefully pull the motor assembly out of the body of the device.

    翻译

  12. Porter-Cable PC60TAG Motor Assembly Replacement: 步骤 11 中的图像 1，1

    • Using a 9/16" wrench, loosen the spindle nut inside the head, from the motor assembly.

    翻译

  13. Porter-Cable PC60TAG Motor Assembly Replacement: 步骤 12 中的图像 1，1

    • Pull the motor assembly away from the head.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Mackenzie Fairbanks

于03/24/16注册

591 声望

创作了5篇指南

徽章: 11

+ 8更多徽章

团队

UMass Dartmouth, Team 2-2, Isaacson Spring 2016 UMass Dartmouth, Team 2-2, Isaacson Spring 2016 的会员

UMASSD-ISAACSON-S16S2G2

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 10

总计 505