修复你的物品 社区 商店

Porter-Cable 382 On/ Off Switch Replacement

你所需要的

  1. Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: 步骤 1 中的图像 1，2 Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: 步骤 1 中的图像 2，2

    • First, locate the three screws on the top of the sander.

    • Using a screw driver with a size T20 star bit, unscrew the screws by turning them to the left.

    编辑

  3. Porter-Cable 382 On/ Off Switch Replacement: 步骤 2 中的图像 1，2 Porter-Cable 382 On/ Off Switch Replacement: 步骤 2 中的图像 2，2

    • Locate your on off switch and in order to remove it you must slide it out of its slot.

    • This shouldnt require any special tools, just wiggle the switch up and out.

    • Make sure this is done carefully, the switch is attached to two wires that may break if they are pulled on too hard.

    编辑

  4. Porter-Cable 382 On/ Off Switch Replacement: 步骤 3 中的图像 1，1

    • Using a spudger such as the one shown, carefully pry open the connectors as shown just enough to slide the prongs of the switch out.

    • Once both prongs are open, the on-off switch can be removed freely and replaced with a new switch.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Nick O'Sadcia

于03/11/16注册

421 声望

创作了3篇指南

徽章: 6

+ 3更多徽章

团队

UMass Dartmouth, Team 8-7, Botvin Spring 2016 UMass Dartmouth, Team 8-7, Botvin Spring 2016 的会员

UMASSD-BOTVIN-S16S8G7

3 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 5

过去 30 天： 8

总计 230