简介

Replacing a broken or scratched lens on a Polaroid Sun 600 LMS.

Move film door slide on the left side of camera forward.
  • Move film door slide on the left side of camera forward.

  • Pull film door open.

添加评论

Open the flash assembly by holding the sides of the top piece of the camera and pushing up gently until it snaps into place.
  • Open the flash assembly by holding the sides of the top piece of the camera and pushing up gently until it snaps into place.

  • If your camera is old or dirty, it may take more force to open the flash assembly.

添加评论

  • Use a spudger on each side to separate the flash segment from the main body.

  • Be careful not to do this too hard because you may pull out the connecting wires.

添加评论

  • Use several plastic opening tools around the edges of the camera's body to separate it from the plastic frame.

添加评论

  • Place left hand on the gray section and right hand on the black section.

  • Pull the sections apart.

添加评论

  • Carefully remove the damaged lens from the interior of the camera.

  • Replace with a new lens.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Ian Hosek

于2010年01月20日注册

333 信誉积分

撰写一个指南

团队

Cal Poly, Team 3-18, Maness Winter 2010 Cal Poly, Team 3-18, Maness Winter 2010 的会员

CPSU-MANESS-W10S3G18

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 7

过去的30天: 53

总计 7,341