简介
This guide is intended for those who have a malfunctioning Flash or broken/cracked Flash Cover on their Polaroid SNAP.
你所需要的
-
-
Open the paper door of the camera, then locate and remove the screws that are on the top and bottom edge of the inside of the camera.
-
Screw head: Phillips, Screw length: 3mm
-
-
-
-
Flip the front face-plate over, so that you’re are looking at the silver plate on the inside.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.
2等其他人完成本指南。