跳转到主内容

简介

This guide will inform you on installing a new battery cartridge.

  • Please note that we did not have a battery cartridge to insert into the camera.
  1. Open the bottom compartment of the camera by sliding the lever towards the opening. Open the bottom compartment of the camera by sliding the lever towards the opening. Open the bottom compartment of the camera by sliding the lever towards the opening.
    • Open the bottom compartment of the camera by sliding the lever towards the opening.

  2. Remove old battery/ film cartridge from camera.
    • Remove old battery/ film cartridge from camera.

  3. Follow the instructions that came with the new battery/ film cartridge to insert the new cartridge into the camera.
    • Follow the instructions that came with the new battery/ film cartridge to insert the new cartridge into the camera.

    • Close the battery compartment of the camera.

    • Note: The camera in this picture does not contain a battery.

终点

11等其他人完成本指南。

Doug Jimenez

于2010年01月21日注册

478 信誉积分

创作了2篇指南

团队

Cal Poly, Team 16-31, Maness Winter 2010 Cal Poly, Team 16-31, Maness Winter 2010 的会员

CPSU-MANESS-W10S16G31

4 名成员

创作了4篇指南

It worked but its expensive

Jessica diaz - 回复

I put new film in, it´s turning on, the flash is going off, but no film is coming out after the flash. What is the problem?

tristanmoeller2013 - 回复

nothing happened

new film installed

no sound

no flash

no action

eminickstone - 回复

I'm having the same issue

Marie -

I'm having same issue.

Marie -

添加评论

浏览统计数据:

过去的24小时: 9

过去的7天: 85

过去的30天: 436

总计 119,809