跳转到主内容

简介

This guide will teach someone how to take off a damaged or torn wrist strap on the Polar M400 and replace it with a new one. A damaged wrist strap could be due to excessive wear and tear or wearing it in wet conditions.

  1. Insert a standard paper clip into the holes on both sides of the watch that connect the watch's face with the wrist strap.
    • Insert a standard paper clip into the holes on both sides of the watch that connect the watch's face with the wrist strap.

  2. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物
  3. Apply an upward pressure to the holes until the locking pins release. Use precision tweezers to remove the pins that connect the face with the strap.
    • Apply an upward pressure to the holes until the locking pins release.

    • Use precision tweezers to remove the pins that connect the face with the strap.

  4. Once the pins are released, the old wrist strap should snap off.
    • Once the pins are released, the old wrist strap should snap off.

    • Simply lock the new wrist strap into place.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Timothy Rocha

于2017年09月28日注册

332 信誉积分

撰写一个指南

团队

I am trying to do the same on my Polar v800 and I cannot remove the locking pins, they seem to be “stuck”, any idea how to loosen them?

Gustavo Fette - 回复

Polar won’t sell spare parts so where can I buy a replacement screen or a replacement front case for the M430?

Olivier Grand - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 35

过去的30天: 173

总计 4,266