跳转到主内容

当前版本的文档还未经巡查,您可以查看最新的已查核版本

你所需要的

  1. , 拆开外壳: 步骤 1 中的图像 1,2 , 拆开外壳: 步骤 1 中的图像 2,2
    • 关闭电源并且移除记忆卡

    • 用一个Phillips #00 规格的螺丝刀除下后壳上4 个 6.4mm 规格的螺丝。

  2. : 步骤 2 中的图像 1,3 : 步骤 2 中的图像 2,3 : 步骤 2 中的图像 3,3
    • 使用指甲或者撬棒,撬开设备顶部的附件端口盖。

    • 使用 Phillips #00 规格的螺丝刀,移除隐藏在附件端口盖下面的 2 个 5.4mm 规格螺丝。

  3. : 步骤 3 中的图像 1,2 : 步骤 3 中的图像 2,2
    • 移除设备底部充电端口旁边的 2 个 5.4mm Phillips #00 规格的螺丝 。

  4. : 步骤 4 中的图像 1,3 : 步骤 4 中的图像 2,3 : 步骤 4 中的图像 3,3
    • 从设备两侧开始,使用塑料开启工具来分离前盖和后盖。

    • 继续用这个方式沿着设备轻轻地撬开它。

    • 需要注意的是,前壳和后壳之间有电线连接,如果您将外壳完全分开,可能会损坏连接线。

  5. : 步骤 5 中的图像 1,2 : 步骤 5 中的图像 2,2
    • 轻缓地将前壳和后壳分离,注意电池和触摸屏幕控制器的接口保持连接。

  6. : 步骤 6 中的图像 1,1
    • 使用撬棒,轻轻地将触摸屏控制器线缆撬起。

  7. : 步骤 7 中的图像 1,1
    • 用撬棒将电池连接线轻轻撬起。

  8. : 步骤 8 中的图像 1,1
    • 分开前后壳。

  9. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 9 中的图像 1,2 : 步骤 9 中的图像 2,2
    • Gently pry open the tab of the flex cable socket on top of the SIM card reader.

    • Free the flex cable by sliding the spudger underneath it and pulling it out of the socket. Rest the flex cable out of the way.

  10. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 10 中的图像 1,3 : 步骤 10 中的图像 2,3 : 步骤 10 中的图像 3,3
    • Use a spudger to release the plastic tab along the inside of the case and gently pry up the SIM card reader.

  11. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 11 中的图像 1,3 : 步骤 11 中的图像 2,3 : 步骤 11 中的图像 3,3
    • Lift the SIM card reader out of the casing.

    • Using a Phillips #00 screwdriver, remove the blue, 5.0mm screw from the SIM car reader.

    • Separate the SIM card reader from the SIM card reader retainer.

终点

另外一个人完成了本指南。

Brittany McCrigler

于03/05/12注册

89,017 声望

创作了131篇指南

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了17,182篇指南

一条评论

I have an error relating to the reader on my Vita. If I took it out without replacing it, will it cause the same or different error so I have to replace it, or will it be (somewhat) fine??

christoffersen366 - 回复

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 12

过去 30 天: 51

总计 9,172