简介

This guide takes you through the process of installing the PS button on the PlayStation Vita.

Power off and remove the memory card.
  • Power off and remove the memory card.

  • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

添加评论

Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.
  • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

  • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

添加评论

  • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

添加评论

  • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

  • Continue working your way around the device gently prying it open.

  • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

添加评论

  • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

添加评论

  • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

添加评论

  • Free the battery cable by gently prying up on the connection with a spudger.

Any idea what type of pcb header is on the board for the battery? I have a motherboard with a broken header but I cant source a replacement

Jimbo Jones - 回复

This is where I screwed up so I recommend extra caution for other newbies. Only the black part is supposed to come off. Don't be an idiot like me and pry off too much...

ylimakiminna - 回复

Yea I messed up there too. Is there a way to fix it?

Alethia Henry - 回复

  • Separate the front and rear cases.

添加评论

  • Pry up the left shoulder button casing with a spudger.

  • Remove the left shoulder button casing.

添加评论

  • Remove the translucent, plastic left shoulder button cover.

添加评论

  • Release the left shoulder button flex cable socket by using a spudger to pry open the tab.

    • Be careful to not break off this small black tab!

  • Using tweezers, slide the flex cable out of the socket. Do not pull on the black tab! Instead, pull the thin flex cable away from the connector (to the left in this image).

添加评论

  • Using a spudger, gently peel up the left shoulder button from the light adhesive connecting it to casing.

This step is unneccesary.

Alexander Mayatsky - 回复

  • Using a spudger, lift and release the tab on the ZIF socket sitting on the SIM card reader.

  • Carefully pull the flex cable out of the ZIF socket, and rest it out of the way.

添加评论

  • Use a spudger to release the tab between the SIM card reader and the back casing assembly.

  • Lift the SIM card reader off the back casing assembly.

This board is not present in the Wifi only version, only the 3G/Wifi version.

dodo - 回复

  • Release the plastic tab on the small flex cable socket by prying it up with a spudger.

  • Using tweezers, gently remove the small flex cable from the socket, and rest it out of the way.

添加评论

  • Use a spudger to lift up the tab on the large ZIF socket.

  • Gently pull the flex cable out of the ZIF socket, and rest it out of the way.

添加评论

  • Disconnect the white Wi-Fi antenna cable with a spudger.

  • Remove the Wi-Fi antenna cable.

This connector isn't present in the Wifi only version, just the 3G/Wifi version.

dodo - 回复

  • Using a Phillips #00 screwdriver, remove the six screws on the two metal brackets:

    • Two 5.0mm, blue screws on the L-bracket securing the upper left button board to the motherboard.

    • Four 5.0mm, blue screws on the square bracket securing the lower left button board to the motherboard.

What is the loose looking cable in this photo?

Dallon Verhaeghe - 回复

  • Starting from the upper left corner, use a spudger to pry up and remove the left button board.

添加评论

  • Using tweezers, peel up and remove the PS button.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Brittany McCrigler

于2012年03月05日注册

79,493 信誉积分

创作了133篇指南

团队

iFixit iFixit 的会员

Community

112 名成员

创作了6,721篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 12

过去的30天: 34

总计 6,538