跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

A damaged or broken cooling fan can make your system overheat so it is important to replace it if that happens in order to prevent any further damage to the system.

  1. On one side of the console (the side adjacent to the fan vent), there will be two 6 mm screws. Unscrew them with a PH #000 screwdriver. On one side of the console (the side adjacent to the fan vent), there will be two 6 mm screws. Unscrew them with a PH #000 screwdriver. On one side of the console (the side adjacent to the fan vent), there will be two 6 mm screws. Unscrew them with a PH #000 screwdriver.
    • On one side of the console (the side adjacent to the fan vent), there will be two 6 mm screws. Unscrew them with a PH #000 screwdriver.

  2. Press and slide the side panel (it will have the two ports) back to reveal an additional 6 mm screw. Unscrew the 6mm screw with a PH #000 screwdriver. Unscrew the 6mm screw with a PH #000 screwdriver.
    • Press and slide the side panel (it will have the two ports) back to reveal an additional 6 mm screw.

    • Unscrew the 6mm screw with a PH #000 screwdriver.

  3. Slide the panel back into place. Slide the panel back into place.
    • Slide the panel back into place.

  4. 任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装

    任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装
  5. Using a plastic opening tool, carefully pry the panel from the main console to reveal the HDMI ports. You will probably need to lift it on both sides in order for the panel to come loose. You will probably need to lift it on both sides in order for the panel to come loose.
    • Using a plastic opening tool, carefully pry the panel from the main console to reveal the HDMI ports.

    • You will probably need to lift it on both sides in order for the panel to come loose.

  6. Turn the console over.
    • Turn the console over.

    • Unscrew the two 9 mm screws with a PH #000 screwdriver.

  7. With the plastic opening tool, carefully pry the console shell panel free and lift it away. With the plastic opening tool, carefully pry the console shell panel free and lift it away.
    • With the plastic opening tool, carefully pry the console shell panel free and lift it away.

  8. Using tweezers, carefully pull the multi colored bundled cable from its port connecting the fan to the console. Carefully lift the fan and its wiring from the device.
    • Using tweezers, carefully pull the multi colored bundled cable from its port connecting the fan to the console.

    • Carefully lift the fan and its wiring from the device.

    • Be mindful of damaging the wires.

    • Take care to keep your fingers away from the fan blades.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Sarah Shand

于2017年02月20日注册

1,338 信誉积分

创作了7篇指南

团队

USF Tampa, Team S3-G1, Sullivan Spring 2017 USF Tampa, Team S3-G1, Sullivan Spring 2017 的会员

USFT-SULLIVAN-S17S3G1

3 名成员

创作了12篇指南

Where do I get a replacement fan tho?

Ponos King - 回复

I think is a 3x3 cm fan, alliexpres has some, but what voltage?

crus - 回复

5V is what i have read

Ethan Amos -

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 20

过去的30天: 126

总计 3,816