PlayStation 4 Pro Power Supply Unit Replacement

步骤 1 Power Supply Unit




• Begin by flipping the console upside down.
• Use your finger to pull and snap off the plastic cover over the hard drive.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 2



• Use a screwdriver to remove the single Phillips #0 screw securing the hard drive caddy.
• Pull the hard drive caddy straight out.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 3
• Flip the console right side up.
• Grip the two corners located at the front of the device.
• Pull upwards until a loud click is heard.
• This may require a lot of force, so do not be afraid to get a little rough with your console.
• After both corners detach, slide the cover backwards and lift off.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 4
• Use a T8 Torx Security screwdriver to remove the five screws.
• Two 31mm screws.
• Three 10mm screws.
• Remove the metal plate.
编辑
5条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 5
• Flip the console to its back once again.
• Use a T8 Torx Security screwdriver to remove the three black 7mm screws in the back panel.
• Remove the bottom cover in the same way as the top cover. Grip on both sides, pull up until a click is heard and slide off.
编辑
一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 6
• Use a T8 Torx security screwdriver to remove the two 10mm silver screws from the metal plate.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 7
• Flip the console over to continue working on the top side.
• Place fingers underneath edge of power supply unit on both sides and pull straight up.
• Be careful not to pull too far, the assembly is still connected at one point.
• Grip the connector behind the power supply and pull straight out.
编辑
7条评论
添加一条评论
添加评论
1024
取消 发帖评论

作者

与8其他贡献者

Ashlyn Chow

于04/25/17注册

3,345 声望

撰写一个指南

徽章: 13

• 
• 
• 

+ 10更多徽章

团队

Cal Poly, Team S21-G5, Livingston Spring 2017 Cal Poly, Team S21-G5, Livingston Spring 2017 的会员

CPSU-LIVINGSTON-S17S21G5

4 名成员

创作了49篇指南

嵌入本指南

选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。

预览