简介

How to disassemble and change the Laser Unit.

视频概述

  1. Turn off the console and disconnect all cables.
    • Turn off the console and disconnect all cables.

    添加评论

  2. You must remove the warranty sticker and 4 screws.
    • You must remove the warranty sticker and 4 screws.

    添加评论

    • After removing HDD bay cover, you will see another 3 screw.

    添加评论

    • Push there to release and remove upper back bezel.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • The upper front bezel is harder to remove.

    添加评论

    • Remove 7 screws to release top cover.

    添加评论

    • Disconnect two flex-cables and move the Laser Unit. Remove the two screws and the small cable and then take out the Power Supply Unit.

    添加评论

    • To release the laser unit disconnect this flex-cable.

    添加评论

    • One flex-cable, for rubbers and the metal bezel.

    添加评论

    • Disconnect this flex-cable and attach it to the new spare part. Let's start assembling.

    添加评论

    • Assembling, assembling...

    添加评论

  4. 添加评论

结论

To reassemble your device, follow these instructions in reverse order.

10等其他人完成本指南。

ZFix

于2013年12月09日注册

160,227 信誉积分

创作了304篇指南

团队

Master Techs Master Techs 的会员

Community

279 名成员

创作了758篇指南

Very good job, kudos!

Kevin Borras - 回复

I have found that there are to types of lasers do you sell the second one that does not have the black screws on top but are silver. I have found the one with the silver screws has a smaller laser flex cable and plug. its for the cech-43xx

jack blevinski - 回复

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 26

过去的30天: 93

总计 17,846