跳转到主内容

简介

Video tutorial - how to replace Laser Lens only:

视频概述

  1. If present, remove the pieces of tape securing the cables to the body of the Blu-ray drive. If present, remove the pieces of tape securing the cables to the body of the Blu-ray drive.
    • If present, remove the pieces of tape securing the cables to the body of the Blu-ray drive.

  2. Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Blu-ray ribbon cable socket.
    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Blu-ray ribbon cable socket.

    • Be sure you are prying up on the movable retaining flap, not the socket itself.

  3. Pull the Blu-ray ribbon cable straight up and out of its socket.
    • Pull the Blu-ray ribbon cable straight up and out of its socket.

  4. Pull the Blu-ray power cable straight up to lift its connector out of the socket on the Blu-ray drive.
    • Pull the Blu-ray power cable straight up to lift its connector out of the socket on the Blu-ray drive.

  5. Remove the single 9.5 mm Phillips screw securing the Blu-ray drive to the lower case.
    • Remove the single 9.5 mm Phillips screw securing the Blu-ray drive to the lower case.

  6. Lift the Blu-ray drive slightly by its right edge to dislodge the control board from its housing. Remove the Blu-ray drive from the PS3.
    • Lift the Blu-ray drive slightly by its right edge to dislodge the control board from its housing.

    • Remove the Blu-ray drive from the PS3.

    • After you reinstall the Blu-ray drive, be sure the control board is firmly seated in the lower case before proceeding.

    • If replacing the Blu-ray drive with a new drive, swap the circuit board from your old drive into the new drive.

结论

To reassemble your device, follow these instructions in reverse order.

17等其他人完成本指南。

ZFix

于2013年12月09日注册

179,934 信誉积分

创作了324篇指南

团队

Master Techs Master Techs 的会员

Community

300 名成员

创作了1,006篇指南

5条评论

Donde puedo comprar refacciones y partes para PS3 Slim?

David - 回复

yo vendo amigo = ivaramso@gmail.com para ventas

Ivan Ramirez -

How can this be easy, but the Blu-Ray drive be considered Moderate? You need to complete the Blu-Ray drive removal prior to replacing the laser lens, which means this is at best a Moderate task.

Ben Kevan - 回复

This is not lens replacement, this is drive replacement. Is there a separate guide for lens replacement?

cmchallam - 回复

Shows how to do the laser assembly in the video but not how to reinstall it in the drive. Lazy guide. Just buy a whole new drive if you are following this guide.

Beninja - 回复

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 20

过去的30天: 70

总计 29,146