跳转到主内容

PlayStation 3 Slim Fan Replacement

你所需要的

  1. PlayStation 3 Slim Fan Replacement, Top Cover: 步骤 1 中的图像 1,1
    • Turn the PS3 over and lay it on its backside.

    • Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.

    • To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

  2. PlayStation 3 Slim Fan Replacement: 步骤 2 中的图像 1,2 PlayStation 3 Slim Fan Replacement: 步骤 2 中的图像 2,2
    • Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

  3. PlayStation 3 Slim Fan Replacement: 步骤 3 中的图像 1,1
    • Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

  4. PlayStation 3 Slim Fan Replacement: 步骤 4 中的图像 1,1
    • Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)

  5. PlayStation 3 Slim Fan Replacement: 步骤 5 中的图像 1,2 PlayStation 3 Slim Fan Replacement: 步骤 5 中的图像 2,2
    • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

    • Lift the top cover off the PS3.

  6. PlayStation 3 Slim Fan Replacement, Power Supply: 步骤 6 中的图像 1,2 PlayStation 3 Slim Fan Replacement, Power Supply: 步骤 6 中的图像 2,2
    • Squeeze the AC inlet connector's locking mechanism and pull straight up to disconnect it from the power supply.

  7. PlayStation 3 Slim Fan Replacement: 步骤 7 中的图像 1,1
    • Pull the DC-Out cables straight up to lift their connector up and out of its socket on the power supply.

  8. PlayStation 3 Slim Fan Replacement: 步骤 8 中的图像 1,1
    • Remove the two 7.6 mm Phillips screws securing the power supply to the lower case.

  9. PlayStation 3 Slim Fan Replacement: 步骤 9 中的图像 1,1
    • Lift the power supply upward from its left edge as viewed from the front of the PS3.

  10. PlayStation 3 Slim Fan Replacement: 步骤 10 中的图像 1,2 PlayStation 3 Slim Fan Replacement: 步骤 10 中的图像 2,2
    • Continue to lift the left edge of the power supply until it lifts off the two metal posts shown in the second picture.

    • Remove the power supply from the PS3, minding any cables that may get caught.

  11. PlayStation 3 Slim Fan Replacement, Fan: 步骤 11 中的图像 1,1
    • Pull the fan cables upward to lift the fan connector up and out of its socket on the motherboard.

  12. PlayStation 3 Slim Fan Replacement: 步骤 12 中的图像 1,1
    • De-route the fan cables from under the plastic hook molded into the fan shroud.

  13. PlayStation 3 Slim Fan Replacement: 步骤 13 中的图像 1,1
    • Remove the two 9.5 mm Phillips screws securing the fan to the heat sink.

  14. PlayStation 3 Slim Fan Replacement: 步骤 14 中的图像 1,1
    • Lift the fan out of the heat sink, minding any cables that may get caught.

结论

To reassemble your device, follow these instructions in reverse order.

61等其他人完成本指南。

一条评论

Andrew, excellent prestation.

Gary Dunn - 回复

添加评论

浏览统计数据:

过去 24 小时: 12

过去 7 天: 88

过去 30 天: 335

总计 72,536