简介

If you want to replace the fan or clean the fan system - video tutorial:


Please SUBSCRIBE to my channel ツ

视频概述

  1. Disconnect the fan cable and remove the nine screws from the bottom side.
    • Disconnect the fan cable and remove the nine screws from the bottom side.

    添加评论

  2. Remove the two heat sink clamps and bottom shield, then gently separate  the motherboard off the top shield.
    • Remove the two heat sink clamps and bottom shield, then gently separate the motherboard off the top shield.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the four Phillips screws and lift the top shield.

    添加评论

  4. 添加评论

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

ZFix

于2013年12月09日注册

160,227 信誉积分

创作了304篇指南

团队

Master Techs Master Techs 的会员

Community

279 名成员

创作了758篇指南

Awesome guide. Thank you so much. I did it, but now I just wonder what that white stuff was when I removed the motherboard. I think it's that thermal stuff people have been talking about and I suppose I have to replace that. I also hope that it's the fan that is what's causing my PS3 to say that it's overheating and shut off. I'm so glad you guys posted this. Great job. I rather do it myself than pay Sony an arm and a leg. Cheers!

chetacheez - 回复

This is CPU / GPU thermal paste / compound. I recommend you Arctic MX-2, MX-4. It is very good and not expensive.

ZFix -

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 20

过去的30天: 94

总计 7,710