修复你的物品 社区 商店

PlayStation 3 Heat Sink Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. PlayStation 3 Heat Sink Replacement, Heat Sink: 步骤 1 中的图像 1，2 PlayStation 3 Heat Sink Replacement, Heat Sink: 步骤 1 中的图像 2，2

    • De-route the fan cables from the plastic finger molded into the heat sink.

    • Disconnect the fan from the motherboard.

    • Pull the connector straight up and out of its socket.

    翻译

  2. PlayStation 3 Heat Sink Replacement: 步骤 2 中的图像 1，1

    • Remove the two 9 mm Phillips screws securing the memory card reader to the chassis.

    翻译

  3. PlayStation 3 Heat Sink Replacement: 步骤 3 中的图像 1，2 PlayStation 3 Heat Sink Replacement: 步骤 3 中的图像 2，2

    • Lift the memory card reader out of the PS3 enough to access its ribbon cable.

    • Flip up the retaining flap on the memory card reader ribbon cable socket.

    • Be sure you are prying up on the retaining flap, not the socket itself.

    • Pull the ribbon cable out of its socket and remove the memory card reader.

    翻译

  5. PlayStation 3 Heat Sink Replacement: 步骤 4 中的图像 1，1

    • Disconnect the DC-In cables from the front of the heat sink.

    • Pull the connector toward the front of the PS3.

    翻译

  6. PlayStation 3 Heat Sink Replacement: 步骤 5 中的图像 1，1

    • Remove the five 9 mm Phillips screws securing the power supply to the chassis.

    翻译

  7. PlayStation 3 Heat Sink Replacement: 步骤 6 中的图像 1，1

    • Lift the power supply by its front edge to clear the two posts attached to the motherboard.

    • Remove the power supply.

    翻译

  8. PlayStation 3 Heat Sink Replacement: 步骤 7 中的图像 1，1

    • Remove the four 16.5 mm shouldered Phillips screws securing the heat sink to the motherboard.

    • Remove the two brackets held under the screws you just removed.

    翻译

  9. PlayStation 3 Heat Sink Replacement: 步骤 8 中的图像 1，1

    • Lift the motherboard assembly off the heat sink.

    • The heat sink may still be held in place by the thermal paste. If this is the case, gently pry the heat sink away from the motherboard housing. Make sure to not bend the copper piping on the heat sink.

    • Be sure to apply a new layer of thermal paste when reattaching the heat sink.

    • Never applied thermal paste before? Our thermal paste guide makes it easy.

    • If you're following the YLOD repair guide, stay tuned for where to apply the replacement thermal paste.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 2,820