1. Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console. Caution with the "Do not void" seal, underneath is also a screw Caution with the "Do not void" seal, underneath is also a screw
    • Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console.

    • Caution with the "Do not void" seal, underneath is also a screw

  2. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  3. If all screws are removed. Use a metal spunger to open the chassis
    • If all screws are removed.

    • Use a metal spunger to open the chassis

  4. Slip the three cables out of the sockets. Use a PH01 screwdriver to remove the four screws securing the optical drive Lift up the optical drive and remove the duct tape under the flex cable.
    • Slip the three cables out of the sockets.

    • Use a PH01 screwdriver to remove the four screws securing the optical drive

    • Lift up the optical drive and remove the duct tape under the flex cable.

    • Now the optical drive is free and ready for replacement

结论

To reassemble your device, follow these instructions in reverse order.

11等其他人完成本指南。

tlroesner

于2012年05月13日注册

1,788 信誉积分

创作了4篇指南

浏览统计数据:

过去的24小时: 5

过去的7天: 32

过去的30天: 125

总计 15,580