简介

This guide will show you the steps to remove the folding hinges at the bast of the headband.

配件

无需配件。

  1. Remove the two screws on the underside of the headband with the PH0 Phillips screw driver. Remove the two screws on the underside of the headband with the PH0 Phillips screw driver.
    • Remove the two screws on the underside of the headband with the PH0 Phillips screw driver.

  2. With the headband fully extended, hold the base of the headband with one hand and with your other hand, hold the top of the headband. With force, pull upwards.
    • With the headband fully extended, hold the base of the headband with one hand and with your other hand, hold the top of the headband.

    • With force, pull upwards.

  3. Remove the rail-piece that is now sticking up by pulling it up and out of the headphone. Repeat on the opposite side and the headband will be released. During reassembly, make the sure the rail-pieces match their respective sides so the headband reinserts properly.
    • Remove the rail-piece that is now sticking up by pulling it up and out of the headphone.

    • Repeat on the opposite side and the headband will be released.

    • During reassembly, make the sure the rail-pieces match their respective sides so the headband reinserts properly.

  4. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  5. While holding the base of the headband with one hand, hold the ear cup with the other hand. Pull them apart to reveal the screw.
    • While holding the base of the headband with one hand, hold the ear cup with the other hand.

    • Pull them apart to reveal the screw.

  6. While apart, remove the screw from the headphone. While apart, remove the screw from the headphone.
    • While apart, remove the screw from the headphone.

  7. Loosen the plastic cover piece that protects the chrome folding hinge. Remove the plastic cover piece.
    • Loosen the plastic cover piece that protects the chrome folding hinge.

    • Remove the plastic cover piece.

    • During reassembly, make sure the plastic covering piece hooks onto the base of the chrome hinge before screwing it back in.

  8. Holding the ear cup with one hand, pull up on the base of the headband with the other hand to release the folding hinge. Repeat for the opposite side if necessary.
    • Holding the ear cup with one hand, pull up on the base of the headband with the other hand to release the folding hinge.

    • Repeat for the opposite side if necessary.

结论

To reassemble your device, follow these instructions in reverse order.

Garrett Leung

于2013年04月16日注册

883 信誉积分

创作了8篇指南

团队

Cal Poly, Team 10-40, Amido Spring 2013 Cal Poly, Team 10-40, Amido Spring 2013 的会员

CPSU-AMIDO-S13S10G40

4 名成员

创作了20篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 282