Pioneer R1 Battery Replacement - iFixit 维修指南

简介

This guide will demonstrate how to access and replace the R1's battery.

你所需要的

步骤 1 Battery

Pioneer R1 Battery Replacement, Battery: 步骤 1 中的图像 1，1

Insert your plastic spudger into the opening near the HDMI port.
Gently pry the back cover of the R1 from the the front by using the spudger along the edges.
Do not pull the back cover straight off the R1 as components of the speakers will be attached to both sides.

步骤 2

Pioneer R1 Battery Replacement: 步骤 2 中的图像 1，1

Lay the R1 flat like an open book.
This will prevent the speakers from becoming disconnected from the motherboard.

步骤 3

Pioneer R1 Battery Replacement: 步骤 3 中的图像 1，1

Slide a strong thin object, like a thin spudger, between the battery and the display.
Slide the object along the length of the battery to remove it from the display.
The adhesive holding the battery in place is strong and the battery is quite soft. Take care not to break open the battery.
Disengage the battery cables from the motherboard.

步骤 4

Pioneer R1 Battery Replacement: 步骤 4 中的图像 1，1

Solder the black cable to the nodule labeled BAT+.
Solder the red cable to the nodule labeled BAT-.
Do not allow the solder from one nodule to touch the other, this may cause the battery to explode.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与1其他贡献者

Christopher Rosario

于02/17/15注册

411 声望

创作了4篇指南

+ 6更多徽章

团队

San Diego State, Team 1-1, Sheppard Winter 2015 San Diego State, Team 1-1, Sheppard Winter 2015 的会员

SDSU-SHEPPARD-W15S1G1

3 名成员

创作了7篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 4

总计 773