Pioneer MXT-X366BT Metal Case Replacement

简介

This guide shows how to replace the metal sleeve on the Pioneer MXT-X366BT. This guide can act as a prerequisite for replacing the internal components of the radio, although the metal sleeve is also available as a replacement part.

Note: The radio must be removed from the vehicle for this guide. If the radio is currently installed in the vehicle, removal may require special assistance.

你所需要的

步骤 1 Metal Casing

Pioneer MXT-X366BT Metal Case Replacement, Metal Casing: 步骤 1 中的图像 1，2

Pioneer MXT-X366BT Metal Case Replacement, Metal Casing: 步骤 1 中的图像 2，2

Apply small amount of pressure inward with a plastic opening tool to release bottom clip.
Pry the top clip with the plastic opening tool to release it.
The head unit is symmetrical and has the same amount of clips on the other side.

编辑

步骤 2

Remove the face plate holder.

编辑

步骤 3

Remove the six 5mm Phillips-head screws with Philips #2 screwdriver.

编辑

步骤 4

Remove the inner three 5mm Phillips head screws, with a Phillips #2 screwdriver, attached to the metal backing.
Remove the metal backing that is now free.

编辑