简介

A broken disk drive can cause the user unable to play CDs on the radio receiver. This guide will show you how to replace the disk drive for the Pioneer FH-X730BS.

  1. Apply pressure to the tabs on each side using the plastic opening tool. You will need to pull the face away from the frame while unhooking the tabs. You will need to pull the face away from the frame while unhooking the tabs.
    • Apply pressure to the tabs on each side using the plastic opening tool.

    • You will need to pull the face away from the frame while unhooking the tabs.

  2. After removing the stereo face from the frame, it should look similar to this.
    • After removing the stereo face from the frame, it should look similar to this.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Remove the ribbon wire from where it is being held in place. This can be done by applying force upwards.
    • Remove the ribbon wire from where it is being held in place. This can be done by applying force upwards.

  5. Unscrew the four 7.3 mm outer screws on the top to remove the top face from the rest of the frame. Unscrew the four 7.3 mm outer screws on the top to remove the top face from the rest of the frame. Unscrew the four 7.3 mm outer screws on the top to remove the top face from the rest of the frame.
    • Unscrew the four 7.3 mm outer screws on the top to remove the top face from the rest of the frame.

  6. Unscrew the four  inner screws that are 7.3 mm long using a Phillips #1 head screw driver to remove the disk drive from the top face plate. Replace the old disk drive with a new one. Replace the old disk drive with a new one.
    • Unscrew the four inner screws that are 7.3 mm long using a Phillips #1 head screw driver to remove the disk drive from the top face plate.

    • Replace the old disk drive with a new one.

结论

To reassemble your device, follow these instructions in reverse order.

Cody Pesta

于2018年09月17日注册

667 信誉积分

创作了6篇指南

团队

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 44