修复你的物品 社区 商店

Pioneer Elite PRO-RO6U Control Panel Circuit Board Replacement

简介

A faulty or defective front control panel may cause buttons on the media receiver to be unresponsive. Replacing the circuit board should resolve issues with the front controls and buttons.

你所需要的

  1. Pioneer Elite PRO-RO6U Control Panel Circuit Board Replacement, Control Panel Circuit Board: 步骤 1 中的图像 1，1

    • Remove the two 6.4 mm Phillips screws on each side of the device's casing.

    翻译

  2. Pioneer Elite PRO-RO6U Control Panel Circuit Board Replacement: 步骤 2 中的图像 1，1

    • Remove the two 6.5 mm Phillips screws on the back of the device casing.

    翻译

  3. Pioneer Elite PRO-RO6U Control Panel Circuit Board Replacement: 步骤 3 中的图像 1，1

    • Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.

    翻译

  5. Pioneer Elite PRO-RO6U Control Panel Circuit Board Replacement: 步骤 4 中的图像 1，1

    • Unlatch the three plastic connectors on the top of the receiver that hold the front panel to the device casing.

    翻译

  6. Pioneer Elite PRO-RO6U Control Panel Circuit Board Replacement: 步骤 5 中的图像 1，1

    • The connectors on the bottom of the device may be very stiff and could require the use of a plastic prying tool.

    • Carefully flip the device over and unlatch the three plastic connectors that hold the front panel to the bottom of the device casing.

    翻译

  7. Pioneer Elite PRO-RO6U Control Panel Circuit Board Replacement: 步骤 6 中的图像 1，1

    • Grip and unplug the ribbon connector that connects the front circuit board to the device.

    翻译

  8. Pioneer Elite PRO-RO6U Control Panel Circuit Board Replacement: 步骤 7 中的图像 1，1

    • Unscrew the three 1/4 Phillips head screws on the back of the front circuit board.

    翻译

  9. Pioneer Elite PRO-RO6U Control Panel Circuit Board Replacement: 步骤 8 中的图像 1，2 Pioneer Elite PRO-RO6U Control Panel Circuit Board Replacement: 步骤 8 中的图像 2，2

    • Grip the circuit board and slide towards the front side of the plastic casing.

    • Lift upwards to remove the circuit board from the front panel.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Cody Carter

于01/30/18注册

1,049 声望

创作了6篇指南

徽章: 5

+ 2更多徽章

团队

Baylor, Team S1-G5, Johnson Spring 2018 Baylor, Team S1-G5, Johnson Spring 2018 的会员

BU-JOHNSON-S18S1G5

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 456