跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

Does the sound coming from your device sound rough? Does your device not emit any sound having ruled out the battery or the volume as the cause? Then the speaker may be the problem. This guide goes through the steps necessary to remove the speaker.

  1. Turn the speaker off before disassembling.
    • Turn the speaker off before disassembling.

    • Pull the suction cup from its groove in the back of the speaker by twisting and turning it.

  2. Remove the four 8.5 mm screws from the back panel of the speaker.
    • Remove the four 8.5 mm screws from the back panel of the speaker.

    • Remove back panel

  3. Manta 螺丝刀工具包

    日常维修的112个替换头

    Upgrade Your Toolbox

    Manta 螺丝刀工具包

    Upgrade Your Toolbox
  4. Carefully pull the front panel apart from the device.
    • Carefully pull the front panel apart from the device.

  5. Detach the plastic speaker connections from  the motherboard using a plastic opening tool.
    • Detach the plastic speaker connections from the motherboard using a plastic opening tool.

    • Some force may be necessary to remove the plastic clips.

  6. After the speaker and the front panel are detached, remove the two 8.5mm screws  that holds the speaker to the front panel. After the speaker and the front panel are detached, remove the two 8.5mm screws  that holds the speaker to the front panel.
    • After the speaker and the front panel are detached, remove the two 8.5mm screws that holds the speaker to the front panel.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Shozaf Zaidi

于2016年02月15日注册

723 信誉积分

创作了4篇指南

团队

IUPUI, Team 1-4, Harley Spring 2016 IUPUI, Team 1-4, Harley Spring 2016 的会员

IUPUI-HARLEY-S16S1G4

3 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 177