Photive Rain Speaker Replacement - iFixit 维修指南

简介

Does the audio coming from your device sound rough? Does your device not emit any audio and you've ruled out the battery or the volume as the cause? Then the speaker may be the problem. This guide goes through the steps necessary to remove the speaker from your Photive Rain device so you can replace the speaker.

你所需要的

步骤 1 Back Panel

Photive Rain Speaker Replacement, Back Panel: 步骤 1 中的图像 1，1

Turn the speaker off before disassembling.
Remove the suction cup from its groove by twisting and turning it.

步骤 2

Photive Rain Speaker Replacement: 步骤 2 中的图像 1，1

Remove the four 8.5 mm screws from the back panel of the speaker by using the Phillips #1 Screwdriver.
Remove back panel

步骤 3 Speaker

Photive Rain Speaker Replacement, Speaker: 步骤 3 中的图像 1，1

Carefully remove the front panel from the device.

步骤 4

Photive Rain Speaker Replacement: 步骤 4 中的图像 1，1

Detach the connector clips from the motherboard using the iFixit Opening Tool.
Some force may be necessary to remove the plastic clips.

步骤 5

Photive Rain Speaker Replacement: 步骤 5 中的图像 1，2

Photive Rain Speaker Replacement: 步骤 5 中的图像 2，2

After the speaker is detached, remove the two 8.5mm screws that hold the speaker to the front panel with a Phillips #1 screwdriver.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与8其他贡献者

abcdef ghijk

于02/15/16注册

723 声望

创作了4篇指南

+ 11更多徽章

团队

IUPUI, Team 1-4, Harley Spring 2016 IUPUI, Team 1-4, Harley Spring 2016 的会员

IUPUI-HARLEY-S16S1G4

3 名成员

创作了4篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 290