跳转到主内容

简介

This bed side light is a bit tricky to open.

Purpose of this was to install an antenna jack (BNC) to attach a telescopic antenna or roof aerial.

配件

没有特定配件。

  1. The bottom panel does not help gaining access to more screws. See next step The bottom panel does not help gaining access to more screws. See next step
    • The bottom panel does not help gaining access to more screws. See next step

  2. Flipping the light upside down, pry upward the small plastic strip with hooks that has to be removed. Flipping the light upside down, pry upward the small plastic strip with hooks that has to be removed.
    • Flipping the light upside down, pry upward the small plastic strip with hooks that has to be removed.

  3. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  4. Next unscrew the two philips head screws to remove the button ring. Next unscrew the two philips head screws to remove the button ring. Next unscrew the two philips head screws to remove the button ring.
    • Next unscrew the two philips head screws to remove the button ring.

  5. Now the screws holding the front screen shield need to be removed and the shield can be pulled away to the front.
    • Now the screws holding the front screen shield need to be removed and the shield can be pulled away to the front.

    • CAREFUL NOT TO DAMAGE THE INTERNAL SCREEN

    • Unscrew the four screws holding the inner screen assembly in place.

  6. The inner screen assembly can be pulled out slightly to reveal tabs on each side that hold the assembly in. Pry the back tabs inwards to release.
    • The inner screen assembly can be pulled out slightly to reveal tabs on each side that hold the assembly in.

    • Pry the back tabs inwards to release.

  7. More to see and modify... More to see and modify...
    • More to see and modify...

终点

3等其他人完成本指南。

Max

于2012年11月13日注册

223 信誉积分

撰写一个指南

Awesome teardown except for one little thing…

The factory sticker shows this is a 3530 which may not be different from a 3520. However, the bottom plate screw MUST be removed in order to separate the two halves. It is a little confusing saying “The bottom panel does not help gaining access to more screws. See next step.” I took that as being unnecessary, so skip.

Takkens Shoes - 回复

I was able to fix my speaker inside it i got this alarm at a thrift store for cheap turns out the one wire just needed a better conenction to get working thank you for the steps to get to it

johnstone1889 - 回复

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 23

过去的30天: 89

总计 628