修复你的物品 社区 商店

Philips Sonicare 9350 Battery Replacement

简介

The Philips Sonicare 9350 electric toothbrushes has rechargeable lithium batteries. If the electric toothbrush doesn't start, battery failure is most likely to blame. If you need to replace the battery, follow this guide.

This guide requires soldering so if you’re not familiar or would like more information, check out this article on the site.

你所需要的

  1. Philips Sonicare 9350 Battery Replacement, Head removal: 步骤 1 中的图像 1，2 Philips Sonicare 9350 Battery Replacement, Head removal: 步骤 1 中的图像 2，2

    • Remove the toothbrush head.

    • Use a screwdriver to pry gently around the bottom of the toothbrush.

    翻译

  2. Philips Sonicare 9350 Battery Replacement, Remove the bottom: 步骤 2 中的图像 1，3 Philips Sonicare 9350 Battery Replacement, Remove the bottom: 步骤 2 中的图像 2，3 Philips Sonicare 9350 Battery Replacement, Remove the bottom: 步骤 2 中的图像 3，3

    • After the bottom of the toothbrush is pried loose, remove it from the base of the brush.

    翻译

  3. Philips Sonicare 9350 Battery Replacement: 步骤 3 中的图像 1，3 Philips Sonicare 9350 Battery Replacement: 步骤 3 中的图像 2，3 Philips Sonicare 9350 Battery Replacement: 步骤 3 中的图像 3，3

    • Use a spudger to open the two clasps inside the toothbrush handle in a downward motion.

    • Turn the toothbrush upside down and push down on a hard surface—this will slide the toothbrush's internal body out.

    翻译

  5. Philips Sonicare 9350 Battery Replacement, Extract the internals: 步骤 4 中的图像 1，2 Philips Sonicare 9350 Battery Replacement, Extract the internals: 步骤 4 中的图像 2，2

    • Pull out the internals of the toothbrush.

    翻译

  6. Philips Sonicare 9350 Battery Replacement, Access the battery: 步骤 5 中的图像 1，2 Philips Sonicare 9350 Battery Replacement, Access the battery: 步骤 5 中的图像 2，2

    • Open the protective cover of the battery.

    • Check the battery model.

    • In this case, the model is a Sony 680mhA lithium battery.

    翻译

  7. Philips Sonicare 9350 Battery Replacement, Desolder both terminals: 步骤 6 中的图像 1，3 Philips Sonicare 9350 Battery Replacement, Desolder both terminals: 步骤 6 中的图像 2，3 Philips Sonicare 9350 Battery Replacement, Desolder both terminals: 步骤 6 中的图像 3，3

    • Open the protection cover of the circuit board.

    • Find the welding points of the positive and negative electrodes of the battery and use the soldering iron to desolder.

    • The battery will fall off after desoldering as shown in the figure.

    • Be careful not to touch other parts of the circuit board when desoldering.

    翻译

  8. Philips Sonicare 9350 Battery Replacement, Install a new battery: 步骤 7 中的图像 1，3 Philips Sonicare 9350 Battery Replacement, Install a new battery: 步骤 7 中的图像 2，3 Philips Sonicare 9350 Battery Replacement, Install a new battery: 步骤 7 中的图像 3，3

    • Use a spudger to pry the battery out at a 45 degree angle.

    • After successfully removing the battery, install the new battery using the reverse procedure.

    • Always use ESD safe tools when working on a circuit board or with batteries such as a nylon spudger.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与4其他贡献者

Dongyi Lin

于05/10/21注册

245 声望

撰写一个指南

徽章: 6

+ 3更多徽章

团队

York University, Team S1-G16, O'Regan Summer 2021 York University, Team S1-G16, O'Regan Summer 2021 的会员

YORK-O'REGAN-SU21S1G16

1 名成员

创作了3篇指南

一条评论

All good advice and it works too. Ignore Philips advice that the battery is not replaceable. It is, with correct knowledge and understanding. Thanks for posting.

Shreds - 回复

添加评论

浏览统计数据:

过去 24 小时： 7

过去 7 天： 72

过去 30 天： 326

总计 8,649