修复你的物品 社区 商店

Philips Norelco MultiGroom 3100 Battery Replacement

简介

This guide will demonstrate how to change the battery of a Philips Norelco MultiGroom 3100. Tear down/reassembly requires a plastic spudger and soldering equipment.

你所需要的

  1. Philips Norelco MultiGroom 3100 Battery Replacement, Power Button: 步骤 1 中的图像 1，1

    • Remove the comb from the top of the trimmer.

    编辑

  2. Philips Norelco MultiGroom 3100 Battery Replacement: 步骤 2 中的图像 1，2 Philips Norelco MultiGroom 3100 Battery Replacement: 步骤 2 中的图像 2，2

    • Grip the attachment and twist it counterclockwise until you hear a click.

    • Pull the attachment up to remove it from the trimmer.

    编辑

  3. Philips Norelco MultiGroom 3100 Battery Replacement: 步骤 3 中的图像 1，2 Philips Norelco MultiGroom 3100 Battery Replacement: 步骤 3 中的图像 2，2

    • Hold the trimmer upright so it is facing you.

    • Insert the plastic opening tool in the gap at the top of the power button.

    编辑

  4. Philips Norelco MultiGroom 3100 Battery Replacement: 步骤 4 中的图像 1，1

    • Apply pressure to pry off the power button.

    编辑

  6. Philips Norelco MultiGroom 3100 Battery Replacement, Casing: 步骤 5 中的图像 1，2 Philips Norelco MultiGroom 3100 Battery Replacement, Casing: 步骤 5 中的图像 2，2

    • Insert the spudger into the bottom of the gray bezel and begin to gently pry it off.

    • Separate the bezel one clip at a time so that the clips do not break.

    编辑

  7. Philips Norelco MultiGroom 3100 Battery Replacement: 步骤 6 中的图像 1，2 Philips Norelco MultiGroom 3100 Battery Replacement: 步骤 6 中的图像 2，2

    • Insert the spudger in the indicated hole and apply a tilting force to loosen the outer casing.

    • Pull upward on the top of the inner housing to remove it from the outer casing.

    编辑

  8. Philips Norelco MultiGroom 3100 Battery Replacement, Battery: 步骤 7 中的图像 1，1

    • Grab the upper casing firmly and pull to seperate from lower casing.

    • This will require some force and may separate suddenly.

    编辑

  9. Philips Norelco MultiGroom 3100 Battery Replacement: 步骤 8 中的图像 1，1

    • Once upper casing is removed, use plastic spudger and insert into the side tabs to free battery casing.

    • Once tabs are freed, pull battery casing from upper casing.

    • Upper casing will not separate from tab separation alone, removal will still require manipulation by hand.

    编辑

  10. Philips Norelco MultiGroom 3100 Battery Replacement: 步骤 9 中的图像 1，1

    • Insert plastic spudger into battery brackets individually. "Wiggle" the bracket out of place

    • Be careful to not bend bracket severely --brackets will need to fit back into place later.

    编辑

  11. Philips Norelco MultiGroom 3100 Battery Replacement: 步骤 10 中的图像 1，1

    • Use a soldering gun and apply heat to the battery contact tabs until solder is malleable.

    • Once solder is malleable, carefully insert a plastic spudger beneath the tab and over the battery to pry battery away from the contact tab.

    • Use proper safety equipment when operating a soldering gun, as burns can occur. Gloves and eye protection recommended.

    编辑

  12. Philips Norelco MultiGroom 3100 Battery Replacement: 步骤 11 中的图像 1，1

    • Once contact tabs have been removed from the battery, the battery can now be removed by hand or by use of a plastic spudger.

    • Locate new battery and prepare for soldering in next step.

    编辑

  13. Philips Norelco MultiGroom 3100 Battery Replacement: 步骤 12 中的图像 1，1

    • Make sure battery is safely secured and re-solder the battery contact tab onto new battery.

    • Check that contact tab is re-soldered onto the original solder.

    • Once solder is dried and cool, toggle the power switch (not the power button) to check that the device is functional.

    • Make sure solder adequately covers the contact tab so the solder will not break in the future

    • Solder with caution. Use gloves and eye protection. Solder contains lead, work in a properly ventilated area.

    编辑
终点

15等其他人完成本指南。

作者

与3其他贡献者

Mahmoud

于09/05/17注册

101 声望

撰写一个指南

徽章: 3

团队

IUPUI, Team S1-G5, Freund Fall 2017 IUPUI, Team S1-G5, Freund Fall 2017 的会员

IUPUI-FREUND-F17S1G5

4 名成员

创作了1篇指南

10条评论

Capitalize Battery in the Title

Go ahead and upload the picture of the device.

Be sure to submit to iFixit for their comments when done.

Linda Freund - 回复

Also include prerequisite guides

Linda Freund - 回复

For the Multigroom QG3380 (which I bought at Costco in Canada), there are some differences. Don’t remove the power button – not needed. Pry off the silver frame – very hard not to break some clips. It uses two 750 mAh AAA NiMH batteries (Suppo HSY-AAA0). I’ve ordered 900 mAh batteries with clips to replace these.

Brian Panhuyzen - 回复

Where did you order the replacement batteries ?

Ferdinando Anceschi -

I had mine from Japan, QG3380 too many clips broke off and indeed don’t remove the power button on that one.

alexander_binder -

添加评论

浏览统计数据:

过去 24 小时： 9

过去 7 天： 54

过去 30 天： 188

总计 29,276