跳转到主内容

配件

没有特定配件。

  1. Remove the comb from the top of the trimmer.
    • Remove the comb from the top of the trimmer.

  2. Place your thumb underneath the blade and push upward to remove it. Place your thumb underneath the blade and push upward to remove it.
    • Place your thumb underneath the blade and push upward to remove it.

  3. Hold trimmer towards you as shown in the diagram. Insert your prying tool/metal spudger into the marked area.
    • Hold trimmer towards you as shown in the diagram.

    • Insert your prying tool/metal spudger into the marked area.

  4. Apply gentle pressure and begin prying open the back panel. Separate the panel one notch at a time.  Listen carefully as you're prying the panel apart and notice each individual notch release. Separate the panel one notch at a time.  Listen carefully as you're prying the panel apart and notice each individual notch release.
    • Apply gentle pressure and begin prying open the back panel.

    • Separate the panel one notch at a time. Listen carefully as you're prying the panel apart and notice each individual notch release.

  5. Pull the trimmer apart using your hands once the panel is at least halfway apart. Pull the wires attached to the battery off of the power connectors before completely removing the back panel. Pull the wires attached to the battery off of the power connectors before completely removing the back panel.
    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

    • Pull the wires attached to the battery off of the power connectors before completely removing the back panel.

  6. Hold the trimmer towards you. Place the metal spudger tool in the marked area.
    • Hold the trimmer towards you.

    • Place the metal spudger tool in the marked area.

  7. Apply gentle pressure and begin prying the front panel.
    • Apply gentle pressure and begin prying the front panel.

    • Separate the front panel one notch at a time.

  8. Pull the trimmer apart using your hands once the panel is at least halfway apart. Pull the trimmer apart using your hands once the panel is at least halfway apart.
    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

  9. Remove the front panel completely from the rest of the beard trimmer.
    • Remove the front panel completely from the rest of the beard trimmer.

  10. Rotate the front panel so that the power switch is facing away from you.
    • Rotate the front panel so that the power switch is facing away from you.

  11. Push the white plastic frame upward to remove it from the notch. Pull the white plastic frame off the front panel of the beard trimmer. Pull the white plastic frame off the front panel of the beard trimmer.
    • Push the white plastic frame upward to remove it from the notch.

    • Pull the white plastic frame off the front panel of the beard trimmer.

  12. Remove the power switch from the front panel once the white plastic frame is removed.
    • Remove the power switch from the front panel once the white plastic frame is removed.

结论

To reassemble your device, follow these instructions in reverse order.

Tamara Titus

于2015年09月03日注册

133 信誉积分

撰写一个指南

团队

USF Tampa, Team 15-2, Blackwell Fall 2015 USF Tampa, Team 15-2, Blackwell Fall 2015 的会员

USFT-BLACKWELL-F15S15G2

4 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 3

过去的30天: 32

总计 4,130