跳转到主内容

简介

In order to access the internal components of the beardtrimmer, the front and back panels must be removed. This guide will instruct you on the process.

配件

没有特定配件。

  1. Remove the comb from the top of the trimmer.
    • Remove the comb from the top of the trimmer.

  2. Place your thumb underneath the blade and push upward to remove it. Place your thumb underneath the blade and push upward to remove it.
    • Place your thumb underneath the blade and push upward to remove it.

  3. Hold trimmer towards you as shown in the diagram. Insert your prying tool/metal spudger into the marked area.
    • Hold trimmer towards you as shown in the diagram.

    • Insert your prying tool/metal spudger into the marked area.

  4. Apply gentle pressure and begin prying open the back panel. Separate the panel one notch at a time.  Listen carefully as you're prying the panel apart and notice each individual notch release. Separate the panel one notch at a time.  Listen carefully as you're prying the panel apart and notice each individual notch release.
    • Apply gentle pressure and begin prying open the back panel.

    • Separate the panel one notch at a time. Listen carefully as you're prying the panel apart and notice each individual notch release.

  5. Pull the trimmer apart using your hands once the panel is at least halfway apart. Pull the wires attached to the battery off of the power connectors before completely removing the back panel. Pull the wires attached to the battery off of the power connectors before completely removing the back panel.
    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

    • Pull the wires attached to the battery off of the power connectors before completely removing the back panel.

  6. Hold the trimmer towards you. Place the metal spudger tool in the marked area.
    • Hold the trimmer towards you.

    • Place the metal spudger tool in the marked area.

  7. Apply gentle pressure and begin prying the front panel.
    • Apply gentle pressure and begin prying the front panel.

    • Separate the front panel one notch at a time.

  8. Pull the trimmer apart using your hands once the panel is at least halfway apart. Pull the trimmer apart using your hands once the panel is at least halfway apart.
    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

结论

To reassemble your device, follow these instructions in reverse order.

Darren Chu

于2015年09月03日注册

1,385 信誉积分

创作了3篇指南

团队

USF Tampa, Team 15-2, Blackwell Fall 2015 USF Tampa, Team 15-2, Blackwell Fall 2015 的会员

USFT-BLACKWELL-F15S15G2

4 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 68